Pr?senzmelder Presence Control PRO IR Quattro KNX

Squaring the circle. Infrared presence detector Presence Control PRO IR Quattro KNX for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, installation height up to 8 m, with digital BUS interface for controlling 4 lighting channels and HVAC, 1760 switching zones for excellent detection quality, square presence detection zone covering 16 m2, mechanically scalable.
Model: Presence detector
Constant light control: Ja
Dimensions(w x h x d):: 120 x 120 x 76 mm
HVAC-control: Ja
Forced switch off: Ja
Voltage: 24 V from KNX bus voltage
Animal zone: Nein
Creep-under protection: Ja
Networkable: Ja
Sensor type: Passive infrared
Optimum mounting height: 2,80 m
Application: inside buildings
Staircase monitoring: Ja
Installation: Ceiling
Recommended installation height: 2,5 – 8 m
Max. transmission range sideways: 3,5 m
Max. transmission range frontally: 3,5 m
Diameter detection range on floor: 7 m
Suitable for wireless transmission: Nein
Remote operation: Ja
Response value sensitivity adjustable: Nein
Response value luminosity adjustable: Ja
With signal unit: Ja
Teach-function for response value luminosity: Ja
Dim function with dimmer basic element: Ja
Mounting method: Flush mounted (plaster)
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ja
Square presence detection zone: 4 x 4 m max. (16m?)
Square radial detection zone: 5 x 5 m max. (25m?)
Surface treatment: Other
Square tangential detection zone: 7 x 7 m max. (49m?)
Type of surface: Matt
Colour: White
RAL-number (akin): 9010
Transparent: Nein
Degree of protection (IP): IP20
Nominal voltage: 30 V
Min. switch-on time: 30 s
Max. duty cycle: 30 min
Detection angle horizontal: – 360 ?
Response value luminosity: 10 – 1000 lx
Temperature: -25 – +55 ?C
Reach mechanically adjustable: Ja
Substation input: Ja
Frequency: 50 – 60 Hz
Alarm function: Ja
Settings: by means of ETS software, remote control or bus
Functions using ETS software (from version 3.0f): Normal mode/Test mode, Semi- / fully automatic mode
Parallel-connected configurations: Master/master, Master/slave
User-friendly setting capability: Teach-in (with optional remote control RC3)
Lighting channels Light 1 ? Light 4: Switching/dimming; switching mode, constant lighting control
Light measurement: Mischlicht
Light-level setting: 10 ? 1000 lux, ?/daylight
Basic brightness stay-‘ON’ time, permanently ‘ON’: Basic brightness „ON” duration, 1 ? 30 min.
HVAC output: depending on presence
Switch-‘ON’ delay: Room surveillance, 1 ? 30 min.
Stay „ON” time: 1 ? 120 min.
Presence stay „ON” time output: 1 ? 255 sec.
Further outputs: Light level
Protection class: II
Housing: UV-resistant, paintable
Model: KNX