Pr?senzmelder Presence Control PRO IR Quattro COM2

Squaring the circle. Infrared presence detector Presence Control PRO IR Quattro COM2 for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, installation height up to 8 m, for switching light as well as HVAC ‘ON’ and ‘OFF’, 1760 switching zones for excellent detection quality, square presence detection zone covering 16 m2, mechanically scalable.
Model: Presence detector
Constant light control: Nein
Dimensions(w x h x d):: 120 x 120 x 76 mm
HVAC-control: Ja
Animal zone: Nein
Creep-under protection: Ja
Networkable: Ja
Sensor type: Passive infrared
Optimum mounting height: 2,80 m
Application: inside buildings
Staircase monitoring: Ja
Installation: Ceiling
Recommended installation height: 2,5 – 8 m
Bridging switch: Ja
Max. transmission range sideways: 3,5 m
Max. transmission range frontally: 3,5 m
Diameter detection range on floor: 7 m
Suitable for wireless transmission: Nein
Remote operation: Ja
Response value sensitivity adjustable: Nein
Response value luminosity adjustable: Ja
Output: – – resistive load 2000 W max. (cos ? = 1), Relay 230 V, – 1000 VA max. (cos ? = 0.5), – Max. „ON” current 800 A/200 ?s, – 30 x (1 x 18 W), 25 x (2 x 18 W), – 25 x (1 x 36 W), 15 x (2 x 36 W), – 20 x (1 x 58 W), 10 x (2 x 58 W), pay attention to specific „ON” currents of electronic ballasts., Switching contact 1, Switching contact 2, Presence, – 230 W max. / 230 V, – 1A max. (cos ? = 1) for HVAC (heating/ventilation/air-conditioning)
With signal unit: Ja
Teach-function for response value luminosity: Ja
Dim function with dimmer basic element: Nein
Mounting method: Flush mounted (plaster)
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ja
Square presence detection zone: 4 x 4 m max. (16m?)
Square radial detection zone: 5 x 5 m max. (25m?)
Surface treatment: Other
Square tangential detection zone: 7 x 7 m max. (49m?)
Type of surface: Matt
Colour: White
RAL-number (akin): 9010
Transparent: Nein
Degree of protection (IP): IP20
Voltage type: AC
Nominal voltage: 230 V
Min. switch-on time: 30 s
Max. duty cycle: 30 min
Detection angle horizontal: – 360 ?
Response value luminosity: 10 – 1000 lx
Max. switching power: 2000 W
Temperature: -25 – +55 ?C
Reach mechanically adjustable: Ja
Max. starting current: 800 A
Substation input: Ja
Frequency: 50 – 60 Hz
Alarm function: Nein
Function setting by DIP switches: DIP 1: Normal / test mode, DIP 2: Semi- / fully automatic mode, DIP 3: Pushbutton / switch mode, DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’
Parallel-connected configurations: Master/master, Master/slave
User-friendly setting capability: Teach-in (with optional remote control RC3)
Light-level setting: 10 ? 1000 lux, ?/daylight
Time setting: Switching contact 1, Switching contact 2, 30 sec. ? 30 min., pulse mode (approx. 2 sec.), IQ mode (automatic adjustment to usage profile), 1 min. ? 2 h stay-„ON” time, Automatic room surveillance, 0 sec. ? 10 min. switch-„ON” delay
Protection class: II
Housing: UV-resistant, paintable
Model: COM2