Pr?senzmelder Presence Control PRO HF 360 KNX

Doesn’t miss a thing. HF-presence detector Presence Control PRO HF 360 KNX for indoors, ideal for WCs with toilet cubicles, changing rooms, stairwells, multi-storey car parks, kitchens, installation height up to 3.5 m, with digital BUS interface for controlling 4 lighting channels and HVAC, 1 ? 8 m reach, reach is electronically adjustable and can be limited in two directions, detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls.
Model: Presence detector
Constant light control: Ja
Dimensions(w x h x d):: 120 x 120 x 56 mm
HVAC-control: Ja
Forced switch off: Ja
Voltage: 24 V from KNX bus voltage
Animal zone: Nein
Creep-under protection: Ja
Networkable: Ja
Sensor type: High Frequency
Application: inside buildings
Optimum mounting height: 2,80 m
Staircase monitoring: Ja
Installation: Ceiling
Recommended installation height: 2,5 – 3.5 m
Bridging switch: Ja
Max. transmission range sideways: 4 m
Max. transmission range frontally: 4 m
Diameter detection range on floor: 8 m
Suitable for wireless transmission: Nein
Remote operation: Ja
Response value sensitivity adjustable: Ja
Response value luminosity adjustable: Ja
With signal unit: Ja
Teach-function for response value luminosity: Ja
Dim function with dimmer basic element: Ja
Detection angle: 360? with 140? angle of aperture, also through glass, wood and stud walls
Mounting method: Flush mounted (plaster)
Adjustment: 1 or 2 detection directions can be adjusted to suit the room situation.
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ja
Surface treatment: Other
Type of surface: Matt
Colour: White
RAL-number (akin): 9010
Transparent: Nein
Degree of protection (IP): IP20
Voltage type: AC
Nominal voltage: 30 V
Min. switch-on time: 30 s
Max. duty cycle: 30 min
Detection angle horizontal: – 360 ?
Response value luminosity: 10 – 1000 lx
Reach: 8 m max. all round, infinitely variable
Temperature: -25 – +55 ?C
Substation input: Ja
Sensor system: 5.8 GHz high-frequency (transmitter output < 1mW)
Alarm function: Ja
Settings: by means of ETS software, remote control or bus
Functions using ETS software (from version 3.0f): Normal mode/Test mode, Semi- / fully automatic mode, Pushbutton / switch mode, Pushbutton 'ON' / pushbutton 'ON'-'OFF'
Parallel-connected configurations: Master/master, Master/slave
User-friendly setting capability: Teach-in (with optional remote control RC3)
Lighting channels Light 1 ? Light 4: Switching/dimming; switching mode, constant lighting control
Light measurement: Mischlicht
Light-level setting: 10 ? 1000 lux, ?/daylight
Basic brightness stay-'ON' time, permanently 'ON': Basic brightness "ON" duration, 1 ? 30 min.
HVAC output: depending on presence
Switch-'ON' delay: Room surveillance, 1 ? 30 min.
Stay "ON" time: 1 ? 120 min.
Presence stay "ON" time output: 1 ? 255 sec.
Further outputs: Light level
Protection class: II
IQ mode: Ja
Housing: UV-resistant, paintable
Model: KNX