Pr?senzmelder Presence Control PRO Dual HF COM1

Twice as vigilant! High-frequency corridor sensor Presence Control PRO Dual HF COM1 for indoors, ideal for passageways and long corridors, installation height up to 3.5 m, for switching light ‘ON’ and ‘OFF’, DUAL-HF technology for detecting radial movement over up to 20 m in two directions, detection regardless of temperature, HF-sensor technology detects movement through glass, wood and stud walls, switches light ‘ON’ almost instantly.
Model: Presence detector
Constant light control: Nein
HVAC-control: Nein
Animal zone: Nein
Creep-under protection: Ja
Networkable: Ja
Sensor type: High Frequency
Optimum mounting height: 2,80 m
Application: inside buildings
Staircase monitoring: Nein
Installation: Ceiling, Corridor
Bridging switch: Ja
Recommended installation height: 2,5 – 3.5 m
Max. transmission range sideways: 3 m
Max. transmission range frontally: 10 m
Diameter detection range on floor: 20 m
Suitable for wireless transmission: Nein
Remote operation: Ja
Response value sensitivity adjustable: Ja
Response value luminosity adjustable: Ja
Output: – – resistive load 2000 W max. (cos ? = 1), Relay 230 V, – 1000 VA max. (cos ? = 0.5), – Max. „ON” current 800 A/200 ?s, – 30 x (1 x 18 W), 25 x (2 x 18 W), – 25 x (1 x 36 W), 15 x (2 x 36 W), – 20 x (1 x 58 W), 10 x (2 x 58 W), pay attention to specific „ON” currents of electronic ballasts.
With signal unit: Ja
Teach-function for response value luminosity: Ja
Dim function with dimmer basic element: Nein
Detection angle: 360? with 140? angle of aperture, also through glass, wood and stud walls
Mounting method: Flush mounted (plaster)
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ja
Surface treatment: Other
Type of surface: Matt
Colour: White
RAL-number (akin): 9010
Transparent: Nein
Degree of protection (IP): IP20
Voltage type: AC
Nominal voltage: 240 V
Min. switch-on time: 30 s
Max. duty cycle: 30 min
Detection angle horizontal: – 360 ?
Response value luminosity: 10 – 1000 lx
Max. switching power: 2000 W
Reach: 10 x 3 m max. in each direction, electronically and infinitely adjustable
Temperature: -25 – +55 ?C
Max. starting current: 800 A
Substation input: Ja
Frequency: 50 – 60 Hz
Sensor system: 5.8 GHz high-frequency (transmitter output < 1mW)
Alarm function: Nein
Function setting by DIP switches: DIP 1: Normal / test mode, DIP 2: Semi- / fully automatic mode, DIP 3: Pushbutton / switch mode, DIP 4: Pushbutton 'ON' / pushbutton 'ON'-'OFF'
Parallel-connected configurations: Master/master, Master/slave
User-friendly setting capability: Teach-in (with optional remote control RC3)
Light-level setting: 10 ? 1000 lux, ?/daylight
Time setting: 30 sec. ? 30 min., pulse mode (approx. 2 sec.), IQ mode (automatic adjustment to usage profile)
Protection class: II
Housing: UV-resistant, paintable
Model: COM1