Pr?senzmelder Presence Control PRO IR Quattro HD COM1 AP

Detection no finer! Infrared presence detector Presence Control PRO IR Quattro HD COM1 AP for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses, installation height up to 10 m, surface-mounting version for switching light ‘ON’ and ‘OFF’, 4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone, mechanically scalable.
Model: Presence detector
Constant light control: Nein
HVAC-control: Nein
Animal zone: Nein
Creep-under protection: Ja
Networkable: Ja
Sensor type: Passive infrared
Optimum mounting height: 2,80 m
Application: inside buildings
Staircase monitoring: Ja
Installation: Ceiling
Recommended installation height: 2,5 – 10 m
Bridging switch: Ja
Max. transmission range sideways: 10 m
Max. transmission range frontally: 10 m
Diameter detection range on floor: 20 m
Suitable for wireless transmission: Nein
Remote operation: Ja
Response value sensitivity adjustable: Nein
Response value luminosity adjustable: Ja
Output: – – resistive load 2000 W max. (cos ? = 1), Relay 230 V, – 1000 VA max. (cos ? = 0.5), – Max. „ON” current 800 A/200 ?s, – 30 x (1 x 18 W), 25 x (2 x 18 W), – 25 x (1 x 36 W), 15 x (2 x 36 W), – 20 x (1 x 58 W), 10 x (2 x 58 W), pay attention to specific „ON” currents of electronic ballasts.
With signal unit: Ja
Teach-function for response value luminosity: Ja
Dim function with dimmer basic element: Nein
Mounting method: Surface mounted (plaster)
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ja
Square presence detection zone: 8 x 8 m max. (64m?)
Square radial detection zone: 8 x 8 m max. (64m?)
Surface treatment: Other
Square tangential detection zone: 20 x 20 m max. (400m?)
Type of surface: Matt
Colour: White
RAL-number (akin): 9010
Transparent: Nein
Degree of protection (IP): IP20
Voltage type: AC
Nominal voltage: 240 V
Min. switch-on time: 30 s
Max. duty cycle: 30 min
Detection angle horizontal: – 360 ?
Response value luminosity: 10 – 1000 lx
Max. switching power: 2000 W
Temperature: -25 – +55 ?C
Reach mechanically adjustable: Ja
Max. starting current: 800 A
Substation input: Ja
Frequency: 50 – 60 Hz
Alarm function: Nein
Function setting by DIP switches: DIP 1: Normal / test mode, DIP 2: Semi- / fully automatic mode, DIP 3: Pushbutton / switch mode, DIP 4: Pushbutton ‘ON’ / pushbutton ‘ON’-‘OFF’
Parallel-connected configurations: Master/master, Master/slave
User-friendly setting capability: Teach-in (with optional remote control RC3)
Light-level setting: 10 ? 1000 lux, ?/daylight
Protection class: II
Housing: UV-resistant, paintable
Model: COM1 AP